1997 OKUMA LFS10-2SP
CNC Lathes
ONE USED OKUMA TWIN SPINDLE CNC LATHE with loader/unloader and gantry system
Hours: as of 8/28/20 and now in warehouse and open to inspection under power.
Run: 67,330
Operate: 19,585
Cut: 11,127
Non Operating: 47,744
In Pro set-up: 47,744
Spindle run: 20,720
| Swing | 8.6" |
| Machining Length | 3.9" |
| # Axis | 4 |
| Chuck Size | 6" |
| Bar Capacity | 2" |
| Power | 10 hp |
| Max RPM | 6,000 RPM |
| Turning Dia | 8.66" |
| Tailstock | No |
| Live Tooling | No |
| Sub Spindle | No |
| Control | CNC (OSP-U100L) |
SWING: 8.6”
MAX. TURNING DIAMETER WITH LOADER: 4.72” X 3.15” THICK
MAX. TURNING DIAMETER W/O LOADER: 8.66”
MAX. TURNING LENGTH: 3.9”
SPINDLE BORE: 2.1”
SPINDLE RPM: 50-6,000
SPINDLE HP: 10/7.5
X TRAVEL: 5.12”
Z TRAVEL: 5.7”
2) EIGHT POSITION TURRETS
TURRET INDEX TIME: 0.3 SEC, NON LIFTING
OD TURRET TOOL SIZE: .750”
ID TURNING TOOL SIZE: 1.250”
RAPID TRAVERSE RATES: 945 IPM IN X & Z
FEED RATES: 0.0001-39.37 IPM
WIRED: 240V
KVA RATING: 26
DIMENSIONS WITH LOADER: 108” X 75” (112” WITH CHIP CONVEYOR) 98.43” HIGH X 10,584 LBS.
EQUIPPED WITH:
OKUMA OSP-U100L CONTROLS WITH 9.5” TFT COLOR DISPLAY, MIRROR IMAGE, GRAPHIC TOOL PATH PLUS TOOL ANIMATION, ABSOLUTE POSITION ENCODERS, TORQUE LIMITER MACHINE PROTECTION, STROKE COMPENSATION, 1050 FEET OF STORAGE, INCH/METRIC, ON SCREEN PROGRAM & ALARM HELP, MACMAN MACHINE UTILIZATION REPORTING, USER TASK I+II W200 COMMON VARIABLES, LAP4 AUTO TURN THREAD GROOVE DRILL, MID-AUTO MANUAL FUNCTION, 3.5” FLOPPY, RS232C PORT AND INTEGRAL HAND HELD REMOTE & TEACH PENDANT FOR GANTRY & LOADER SYSTEMS
TWO KITAGAWA MD. B206 3-JAW CHUCKS
NICE COMPLIMENT OF TURRET TOOL HOLDERS INCLUDING WHAT IS ALREADY IN THE TURRETS PLUS 13) ADDITIONAL OD/ID/UNIVERSAL TOOL HOLDERS, BUSHINGS, REPLACEMENT JAWS FOR GRIPPERS IN DIFFERENT SIZES, STICK TOOLS, AND AN OKUMA TOOL BOX KIT.
CHUCK JAWS
ENOMOTO REAR DISCHARGE CHIP CONVEYOR
OGL3FII GANTRY SYSTEM WITH DUAL CARRIERS
CAPACITY PER ARM: 6.6 LBS.
PART SIZE PER GRIPPER: 4.72” X 3.15”
PART EXCHANGE TIME: 5.5 SEC
HAND TILT TIME: 1 SEC
RAPIDS IN X & Y: 200 & 100 M/MIN
HAND SWING: 90 DEG/SEC
3-JAW AIR CHUCKS W/SPRING PUSHERS & 0.8” OF STROKE W/GRIP CONFIRMATION
SIX POSITION LOAD/UNLOAD STATION TO RIGHT THAT BRINGS PARTS UP TO GANTRY SYSTEM
LIGHTS
COOLANT
MANUALS:
2) SPINDLE SERVO MANUALS
2) ADDITIONAL FUNCTION MAINTENANCE MANUALS
2) EACH – SERVO MOTOR #4017E & 4018
1) OGL 3F OPERATORS AND MAINTENANCE MANUALS
2) LFS OPERATORS AND MAINTENANCE MANUALS
3) PARTS BOOKS FOR LFS10-2SP
1) EACH – ELECTRICAL FOR OSP CONTROL, 1) FOR LFS10-2SP
CONDITION: EXCELLENT (RAN MOSTLY STEEL & ALUMINUM)
YEAR OF MANUFACTURE: 1997
SN: 09030050
Hours: as of 8/28/20 and now in warehouse and open to inspection under power.
Run: 67,330
Operate: 19,585
Cut: 11,127
Non Operating: 47,744
In Pro set-up: 47,744
Spindle run: 20,720
ONE USED OKUMA TWIN SPINDLE CNC LATHE
Model: LFS10-2SP
Swing: 8.6”
Max. turning diameter with loader: 4.72” x 3.15” thick
Max. turning diameter w/o loader: 8.66”
Max. turning length: 3.9”
Spindle bore: 2.1”
Spindle RPM: 50-6,000
Spindle HP: 10/7.5
X travel: 5.12”
Z travel: 5.7”
2) Eight position turrets
Turret index time: 0.3 sec, non lifting
OD turret tool size: .750”
ID turning tool size: 1.250”
Rapid traverse rates: 945 ipm in X & Z
Feed rates: 0.0001-39.37 ipm
Wired: 240V
KVA rating: 26
Dimensions with loader: 108” x 75” (112” with chip conveyor) 98.43” high x 10,584 lbs.
EQUIPPED WITH:
Okuma OSP-U100L controls with 9.5” TFT color display, Mirror image, Graphic tool path plus tool animation, absolute position encoders, torque limiter machine protection, stroke compensation, 1050 feet of storage, inch/metric, on screen program & alarm help, MacMan machine utilization reporting, User Task I+II w200 common variables, LAP4 Auto Turn thread groove drill, Mid-Auto Manual function, 3.5” Floppy, RS232C port and Integral hand held remote & Teach pendant for gantry & loader systems
Two Kitagawa Md. B206 3-jaw chucks
Nice compliment of turret tool holders including what is already in the turrets plus 13) additional OD/ID/Universal tool holders, bushings, replacement jaws for grippers in different sizes, stick tools, and an Okuma tool box kit.
Chuck jaws
Enomoto rear discharge chip conveyor
OGL3FII Gantry system with Dual Carriers
Capacity per arm: 6.6 lbs.
Part size per gripper: 4.72” x 3.15”
Part exchange time: 5.5 sec
Hand tilt time: 1 sec
Rapids in X & Y: 200 & 100 m/min
Hand swing: 90 deg/sec
3-jaw air chucks w/spring pushers & 0.8” of stroke w/grip confirmation
Six position load/unload station to right that brings parts up to gantry system
Lights
Coolant
Manuals:
2) Spindle servo manuals
2) Additional Function Maintenance manuals
2) each – Servo motor #4017E & 4018
1) OGL 3F Operators and Maintenance manuals
2) LFS Operators and Maintenance manuals
3) Parts books for LFS10-2SP
1) Each – Electrical for OSP control, 1) for LFS10-2SP
Condition: Excellent (ran mostly steel & aluminum
