DN Solutions Md. DVF 5000 full 5-axis VMC
Vertical Machining Centers (5-Axis or More)
ONE LIKE NEW, LOW HOUR, NEW in 2022,DN SOLUTIONS 5-AXIS VMC with One year parts warranty from DN Solutions included.
Model: DVF 5000
Travels:
X: 24.6”
Y: 17.7”
Z: 15.7”
B1: +110 degrees, minus 30 degrees
Table: 19.7” in diameter
Max. part diameter: 21.7”
Max. part height: 17.7”
Max. part weight: 882 lbs.
Spindle nose to table top (Without AWC) 150 mm to 550 mm (5.9" to 21.65")
Spindle RPM: 18,000
Spindle HP: 30
Spindle taper: Cat 40 Big Plus
B axis rpm: 20
C axis rpm: 20
ATC capacity: 120
Tool change time: 1.30 sec
Tool change time chip to chip: 5.3 sec
Rapids: 1,575 ipm
Dimensions: 87” wide x 114” deep x 114” high x 16,750 lbs.
EQUIPPED WITH:
Fanuc 31i-B5 CNC controls is supplied with DSQ level 3, which includes both 600 block look ahead (AICC II + high speed processing) as well as a data server pre-installed with a 1 gigabyte memory card
Manual pulse generator
Renishaw® RMI-Q radio receiver, RTS tool setter and Renishaw GUI software. Touching off tools with the Renishaw RMP 600 Touch Probe
LNS Md. SF-C50 Super fine chip conveyor, which filters down to 50 microns
225 psi Coolant thru spindle
Air blast thru spindle
Absolute rotary encoders are on B AND C AXES
The X, Y and Z-axes have absolute type, linear glass scales that do not require referencing at power on
Original shipping brackets
Coolant chiller
Manuals
Specifications are approximate, intended solely as a guide and are not binding. It is the buyers’ responsibility to inspect the goods and ascertain if the specifications, description, and condition of the goods conform to the buyers’ requirements.
New: Nov. 2022, Installed Jan. 27, 2023
Hours: as of 4/4/2024
Power On: 3,588
Run: 117
Cut: 902
In plant and under power.
DN Solutions will provide the following warranty & services:
1. DNSA will offer a 1 year parts warranty to the next end-user, starts upon installation at new end-user.
2. DNSA will ensure the machine is within factory tolerances and will do a full inspection upon installation at the new end-user. (DNSA is not required to install the machine, but will provide a “factory inspection” FOC to the new end-user and guarantee the machine to be within factory specs)
3. DNSA will laser measure and compensate all 5-axis upon installation at the new end user, Free Of Charge.
Best regards, Jerry Ditter, Pres.
Serving industry Since 1978 www.ditterindustriesinc.com
| X | 24.6" |
| Y | 17.7" |
| Z | 15.7" |
| # Axis | 5 |
| Power | 30 hp |
| RPM | 18,000 RPM |
| # ATC | 120 |
| Taper | Cat 40 Big Plus |
| Control | CNC (Fanuc 31i-B5) |
| Dimensions | 87" x 114" x 114" |
| Weight | 17,000 lbs. |
Installed 2023
ONE DN SOLUTIONS 5-AXIS VMC with One year parts warranty from DN Solutions included, plus more, per the following:
Model: DVF 5000
Travels:
X: 24.6”
Y: 17.7”
Z: 15.7”
B1: +110 degrees, minus 30 degrees
Table: 19.7” in diameter
Max. part diameter: 21.7”
Max. part height: 17.7”
Max. part weight: 882 lbs.
Spindle nose to table top (Without AWC) 150 mm to 550 mm (5.9" to 21.65")
Spindle RPM: 18,000
Spindle HP: 30
Spindle taper: Cat 40 Big Plus
B axis rpm: 20
C axis rpm: 20
ATC capacity: 120
Tool change time: 1.30 sec
Tool change time chip to chip: 5.3 sec
Rapids: 1,575 ipm
Dimensions: 87” wide x 114” deep x 114” high x 16,750 lbs.
EQUIPPED WITH:
Fanuc 31i-B5 CNC controls is supplied with DSQ level 3, which includes both 600 block look ahead (AICC II + high speed processing) as well as a data server pre-installed with a 1 gigabyte memory card
Manual pulse generator
Renishaw® RMI-Q radio receiver, RTS tool setter and Renishaw GUI software. Touching off tools with the Renishaw RMP 600 Touch Probe
LNS Md. SF-C50 Super fine chip conveyor, which filters down to 50 microns
225 psi Coolant thru spindle
Air blast thru spindle
Absolute rotary encoders are on B AND C AXES
The X, Y and Z-axes have absolute type, linear glass scales that do not require referencing at power on
Original shipping brackets
Coolant chiller
Manuals
Specifications are approximate, intended solely as a guide and are not binding. It is the buyers’ responsibility to inspect the goods and ascertain if the specifications, description, and condition of the goods conform to the buyers’ requirements.
New: Nov. 2022, installed 1/23/2023
SN: MV0111-000860
Hours: as of 4/4/2024
Power On: 3,588
Run: 117
Cut: 902
In plant and under power.
DN Solutions will provide the following warranty & services to any buyer on the contiguous USA:
1. DNSA will offer a 1 year parts warranty to the next end-user, starts upon installation at new end-user.
2. DNSA will ensure the machine is within factory tolerances and will do a full inspection upon installation at the new end-user. (DNSA is not required to install the machine, but will provide a “factory inspection” FOC to the new end-user and guarantee the machine to be within factory specs)
3. DNSA will laser measure and compensate all 5-axis upon installation at the new end user, Free Of Charge.
In plant and under power.
Best regards, Jerry Ditter, Pres.
Serving industry Since 1978 www.ditterindustriesinc.com
