QUICKSILVER Q13053

Images (8)
Overview
Type:
Gantry Machining Centers (incld. Bridge & Double Column)
ID #:
371374
Condition:
Used - Excellent
Year:
2012
Stock #:
803
Status:
For Sale
Description

127' X 24' X 6', QUICKSILVER, NO. Q13053, 5-AXIS, NEW 2012, BUILT TO MACHINE MOLDS FOR WIND GENERATOR BLADES. CAN RECONFIGURE WITH 1 YEAR WARRANTY. ONE LIKE NEW QUICKSILVER 5- AXIS, 6 SIDED MACHINING CAPABLE, TRAVELING COLUMN GANTRY TYPE VMC, MODUARLY DESIGNED FOR EXPANSION OR REDUCTION MACHINE WAS USED TO MACHINE CARBON FIBER 30-40 METER WIND GENERATOR BLADES

Specifications

ORIGINAL TRAVELS: X: 30,500 MM, 1200.78”, OR 100’ Y: 5,000 MM, 196.8”, OR 16.4’ Z: 3,500 MM, 137.7” OR 11.48’ ACTUAL TRAVELS: 127’ X 24’ X 6’ RAPID TRAVERSE IN X, Y, AND Z: 30,000 MM/M OR 1,181 IPM RATED ACCURACY: .005” AT TOTAL SYSTEM ACCURACY C AXIS: A-AXIS ROTATION: OR MINUS 225 DEGREES OR MINUS 100 DEG MAX. SPEED CONT: 72 DEG/SEC @ 3,000 RPMSAME MAX. SPEED POSITIONING: 110 DEG/SEC@3K119 DEG/SEC @ 3,000 RPM MAX. TORQUE CONTINUOUS: 300 NM/221 FT. LBS.260 NM/191 FT. LBS. MAX. TORQUE NON-CONT: 370 NM/272 FT. LBS.SAME SPINDLE: PDS MFG. WITH YASKAWA SERVO MOTORS IN HSK63-F OR ISO30 SPINDLE HAS “FORCE SENSE FEEDBACK” FOR DRILLING OR MACHINING THRU MULTIPLE LAYERS OF DIFFE ENT MATERIALS TO HELP MINIMIZE BURRS SPINDLE SPEEDS: OPEN TO WHAT YOUR NEEDS ARE POWER: 370 NM (YOUR CHOICE) SPINDLES ARE INTERCHANGEABLE; SO IF YOU WENT FROM MACHINING A MOLD, YOU COULD CHANGE THE SPINDLE OUT FOR THE DISPENSING OF MOLD AGENTS, THAN PUT A BUFFING OR POLISHING SPINDLE IN, ETC. ATC: 24 PLACE AND EXPANDABLE PRE LOADED DUAL RACK AND PINION WITH AC SERVO MOTORS THAT FEED BACK TO EACH OTHER TO MAINTAIN ACCURA Y HIM CONTROLLER: COLOR SCREEN, CAM-SOFT PLATFORM, PC BASED CONVERSATIONAL. SYSTEM ACCEPTS VIRTUALLY A Y SOLID OR SURFACE FILE FORMAT FOR PROGRAMMING. CUSTOMER CONFIGURABLE. 32 AXIS, COGNITIVE, WITH LASER INTER-PROXIMITY AND BUILT-IN TEMPERATURE CONTROLS THAT MEASURE HEAT, UMIDITY, AND BAROMETRIC PRESSURE. BUILT FOR THE AEROSPACE, AUTOMOTIVE, SHIP BUILDING, WIND ENERGY, AND THE PRE-FAB INDUSTRIES INITIALLY DESIGNED TO MILL WIND GENERATOR BLADE MOLDS AND BECAUSE IT IS BUILT ON TWO METER LONG BLOC S, YOU CAN EXPAND THESE DIMENSIONS OR REDUCE THEM AS REQUIRED. DESIGNED TO MACHINE COMPOSITES AND LIGHT ALLOYS OR MIG WELDING, ASSEMBLY, DISPENSING MOLD AGENTS, BU FING/POLISHING, PAINTING, AND PFE AUTOMATIC COMPOSITE LAYUP. IMPORTANT: THIS MACHINE CAN REDUCE THE NUMBER OF MACHINES REQUIRED TO MAKE A PART WITHOUT HAVING TO RANSFER THE PART, SO YOUR ACCURACIES REMAIN INTACT. MACHINE CAN BE CUSTOMIZED TO FIT YOUR NEEDS! OR SOLD AS OFFERED. NEW 2012 - ORIGINAL COST WAS $3,000,000.00 ONE YEAR WARRANTY AND INSTALLATION-TRAINING INCLUDED. SPECIFICATIONS ARE APPROXIMATE, INTENDED SOLELY AS A GUIDE AND ARE NOT BINDING. IT IS THE BUYERS' RE PONSIBILITY TO INSPECT THE GOODS AND ASCERTAIN IF THE SPECIFICATIONS, DESCRIPTION, AND CONDITION OF HE GOODS CONFORM TO THE BUYERS' REQUIREMENTS. BEST REGARDS, JERRY DITTER, PRES. – 847-265-1075