OKUMA HOWA, NO. V60R-M, MACHINE HAS BEEN REBUILT AND RUNS LIKE A TOP. THE LIVE MILLING HAS NEVER BEEN USED OKUMA HOWA V 60R-MC, 15" CHUCK VERTICAL TURNING CNC LATHE
Okuma Howa V 60R-MC, 15" Chuck Vertical Turning CNC Lathe Model: V60R-MC S/N: 61051 Year: 2005 Condition: Good but could use a paint job. Specifications: Max Swing 27.6" Maximum Cutting Diameter 24.00" Maximum Cutting Length 26.00" X Axis Travel 14.6" Z Axis Travel 26.00" Rapid Traverse Rate 944 IPM X and Z Spindle Center Height From Floor 42.7" Spindle Nose A2-11 Spindle Speeds, Infinitely Variable 20 - 2,000 RPM Spindle Drive Motor 40/30 HP Turret Type V 12 Number of Driven Tools 6 stations Driven tools RPM 1-2000 RPM Collet for Driven tools ER 323 Max Tool size 1.250" (tap M20) Driven tools HP 5 HP C axis .001 Deg. Floor space required W 80.94" X L 101.96" Machine Height H 144.09" Machine Weight (Approximate) 20,900 Lbs. Shipping dimensions: 11’8” wide x 11’ high Equipped With: Fanuc CNC Control 18 IT HOWA Hydraulic 3-jaw Chuck - 15" (24” chuck available) Standard tooling Package, 3 stick, 3 boring bar The Live milling feature was never used! 1) Live milling head included High And Low Chucking Pressure (OPTION) Chip Conveyor Rear Discharge Interfaced for robot Original door will be placed back onto machine prior to shipping Live milling with C axis Coolant tank and pumps Coolant thru the turret 480V / 38 KVA All available Manuals This machine was rebuilt on 5/17/2012 and used lightly since. THIS IS WHAT WAS REBUILT ON MACHINE. Disassemble Machine as necessary for Repair Cleaned and inspected all parts for wear or damage and advise Rebuilt spindle complete Repair and replaced ball screws as needed Replaced all thrust bearings for ball screws Grind column ways flat Parallel and square Machined back of saddle Scraped saddle to match column ways Grind ways on top of saddle flat, Parallel and Square Machined vertical slide Scraped vertical slide to Match top of saddle Machined and scraped all gibs and hold downs Cleaned out way lube system and replaced metering units as needed Replaced all way wipers Assembled machine complete. Inspection report available. F.O.B.: Milwaukee, WI
SPECIFICATIONS: MAX SWING27.6" MAXIMUM CUTTING DIAMETER24.00" MAXIMUM CUTTING LENGTH26.00" X AXIS TRAVEL14.6" Z AXIS TRAVEL26.00" RAPID TRAVERSE RATE944 IPM X AND Z SPINDLE CENTER HEIGHT FROM FLOOR42.7" SPINDLE NOSEA2-11 SPINDLE SPEEDS, INFINITELY VARIABLE20 - 2,000 RPM SPINDLE DRIVE MOTOR40/30 HP TURRET TYPEV 12 NUMBER OF DRIVEN TOOLS6 STATIONS DRIVEN TOOLS RPM1-2000 RPM COLLET FOR DRIVEN TOOLSER 323 MAX TOOL SIZE1.250" (TAP M20) DRIVEN TOOLS HP5 HP C AXIS.001 DEG. FLOOR SPACE REQUIRED W 80.94" X L 101.96" MACHINE HEIGHTH 144.09" MACHINE WEIGHT (APPROXIMATE)20,900 LBS.