BULLARD 36" DYNATROL

Images (14)
Video (1)
Overview
Type:
Vertical Boring Mills (incld VTL)
ID #:
371376
Condition:
Used - Excellent
Year:
1967
Stock #:
22219
Status:
For Sale
Description

ONE USED BULLARD DYNATROL HIGH COLUMN VERTICAL TURRET LATHE

Specifications

High column, 50 Horsepower, 585 rpm, chromed ways

Table Dia
36 in
Swing
48 in
Work Ht-U/R
51 in
Power
50 hp
RPM
585 rpm
Dimensions
100" x 100" x 180" to top of pendant
Weight
36,360 lbs.

ONE USED BULLARD DYNATROL VERTICAL TURRET LATHE Chuck diameter: 36” Under table diameter: 16” Max. swing with side head below table: 48” Max. swing with side head in working position: 39” Max. height under rail: 30” is standard, this one is 54” Max. travel of rail in Z axis: 51” (33” is std.) Max. distance of ram head from centerline of chuck: 21.5” Max. travel of ram head left to tight: 43 ¾” HP: 50/1800 rpm/440v Speed range: 16 to 585 rpm with electronic speed control Rail head: 9” with 4-position turret Rail head stroke: 42” Weight: 36,360 lbs. EQUIPPED WITH: 36” 3-jaw power operated chuck 24” extra height 20 speed head stock Chrome Hardened replaceable ways on rail head and side head Rail head and side head equipped with Size-au-Trol attachments Side head with 4-position manual indexing Coolant Rail binders are manually operated Pendant controls with pistol grip for ram and side heads SN: 32069, new 1967 F.O. B. – Cypress, TX Low hours and checked out by X-Bullard factory man service and found to be in Excellent condition! With No issues. Note: Bullard uses the same transmission in this machine as they do in their 106” VTL’s, so they don’t downsize because of chuck diameter. Note: Videos were taken just prior to prepping for shipment and there was no air compressor so the rapids aren’t up to the speeds. It requires compressed air to run at full rapids. Video link: https://youtu.be/mIo-pVHwlGg Video link: https://youtu.be/CoQS306sIJk Video link side head: https://youtu.be/-C2-7-nf2s8 Video link ram head: https://youtu.be/tpS_FV4eZJ8