OKUMA 4-AXIS DUAL TURRET BOXED WAY CNC LATHE WITH LIVE MILLING
OKUMA 4-AXIS DUAL TURRET BOXED WAY CNC LATHE WITH LIVE MILLING Model: Super Big Bore LU-35-IIM -2SC-2000 Swing over bed: 29” Swing over saddle: 18.90” Distance between centers: 78.74” Max. turning diameter: 21.65” Max. work length: 81.50” Spindle rpm: 2,800, 4-speed ranges Spindle bore: 175 to 180 mm: 7.0866” Spindle mount: A2-15 Spindle HP: 50 Spindle index increments: 0.001 degree Turrets: 12 station upper and all live mill capable, 10 station lower Rapid travels: 591 ipm in X, 787 ipm in Z Live milling rpm: 4-2,000 Live mill HP: 7/5 Dimensions: 8’ x 21’ Weight: 36,080 lbs. EQUIPPED WITH: OSP-P300L controls Portable pulse handle Multi Tap transformer UL prep spec Super Big Bore spindle A2-15 A2-15 rear of spindle prepped for chuck adapter Thread start point offset Chip conveyor Prepped for SMW air chuck for both front and rear of spindle Hyd/air chuck switchable interface Variable spindle speed threading Rapid traverse over ride switch 3-jaw Schunk 500 mm chuck for front of spindle, self-contained pneumatic chuck with 7” bore 4-jaw manual independent 600 mm rear chuck package Chuck jaws Standard Tool package M, plus 5 Live holders, three with Quick Change Capto 5 Manuals SN: 507.182275, new June 2016 Low hours – Machine was only used for “finishing” operations, no hogging. Note: I had a Toshiba 200S that was new in 2016 from the same shop and it only had 155 hrs. on it and I’m guessing this is about the same hours too. F.O.B. – Houston, Texas
SWING OVER BED: 29” SWING OVER SADDLE: 18.90” DISTANCE BETWEEN CENTERS: 78.74” MAX. TURNING DIAMETER: 21.65” MAX. WORK LENGTH: 81.50” SPINDLE RPM: 2,800, 4-SPEED RANGES SPINDLE BORE: 175 TO 180 MM: 7.0866” SPINDLE MOUNT: A2-15 SPINDLE HP: 50 SPINDLE INDEX INCREMENTS: 0.001 DEGREE TURRETS: 12 STATION UPPER AND ALL LIVE MILL CAPABLE, 10 STATION LOWER RAPID TRAVELS: 591 IPM IN X, 787 IPM IN Z LIVE MILLING RPM: 4-2,000 LIVE MILL HP: 7/5 TAIL STOCK STROKE: 6.7” DIAMETER: 4.72” MAX. THRUST: 2,200 LBS. DIMENSIONS: 8’ X 21’ WEIGHT: 36,080 LBS. EQUIPPED WITH: OSP-P300L CONTROLS PORTABLE PULSE HANDLE MULTI TAP TRANSFORMER UL PREP SPEC SUPER BIG BORE SPINDLE A2-15 A2-15 REAR OF SPINDLE PREPPED FOR CHUCK ADAPTER REAR SPINDLE 600 MM 4-JAW INDEPENDENT REAR CHUCK PACKAGE THREAD START POINT OFFSET CHIP CONVEYOR PREPPED FOR SMW AIR CHUCK FOR BOTH FRONT AND REAR OF SPINDLE HYD/AIR CHUCK SWITCHABLE INTERFACE VARIABLE SPINDLE SPEED THREADING RAPID TRAVERSE OVER RIDE SWITCH SCHUNK 500 MM CHUCK FOR FRONT OF SPINDLE, SELF-CONTAINED PNEUMATIC CHUCK WITH 7” BORE CHUCK JAWS PULSE WHEEL TOW ALONG TAIL STOCK WITH A LIVE QUILL STANDARD TOOL PACKAGE M, PLUS 5 LIVE HOLDERS, THREE WITH QUICK CHANGE CAPTO 5 HOLDERS MANUALS SN: 507.182275, NEW JUNE 2016 LOW HOURS IN PLANT UNDER POWER – HOUSTON, TEXAS Specifications are approximate, intended solely as a guide and are not binding. It is the buyers’ responsibility to inspect the goods and ascertain if the specifications, description, and condition of the goods conform to the buyers’ requirements.