3.5" bar capacity, 60 place ATC, HSK-A63 spindle taper, and nicely optioned.
Big Bore option for 3.150" thru spindle, Parts catcher, Cool Jet 750psi coolant, Coolant thru spindle, Flex-E-On FX835 air collet chuck, Flex-E-On FX557oK air package, Flex-E-On FX632 hydraulic collet chuck for 2nd spindle, lift up hinged chip conveyor, OSP-P300S controls
|Max RPM||6,000 RPM|
12,000 rpm milling spindle with CTS and HSK-A63 spindle nose Travels: X: 19.69" Z: 31.5" Y: 6.3" (+ 3.15, -3.15") B: 225 degrees 1,575 ipm Rapids Note: Main and sub spindle Chucks were used basically as "indexers". New milling spindle recently installed. Ran all aluminum parts.