Overview
Type:
CNC Lathes
Manufacturer:
OKUMA
Model:
LB45III-C X 2000
Condition:
Used - Excellent
Year:
2014
Stock #:
41737
Status:
For Sale
Description

Only 254 "Cut" hours, 10.23" bore thru spindle, Live milling, 60 HP, Schunk Rota TB2 600-275 Z450 3-jaw air chuck, OSP=P300LA controls with AOT & IGF Conversational controls.

Specifications
Swing35.43"
Machining Length78.74"
Chuck Size24"
Bar Capacity7"
Power60 hp
Max RPM900 RPM
Turning Dia25.98"
TailstockYes
Live ToolingYes
Sub SpindleNo
ControlCNC (OSP-P300LA)
Dimensions226" x 91" x 103"
Weight31,900 lbs.

ONE USED OKUMA SUPER BIG BORE CNC LATHE MODEL: LB45-III-1SC-SBB X 2000 MM Spindle bore: 10.23” Spindle: A2-20 Spindle HP: 60/50 Spindle RPM: 30-900 rpm Swing over bed: 35.43” Swing over carriage: 21.6” Max. turning diameter: 25.96” X travel: 17.32” Z travel: 81.1” Max. length of cut: 78.74” Max. weight on spindle including chuck: 2,200 lbs. Max. weight on spindle including chuck using tail stock: 3,300 lbs. Turret: 12 stations and takes 1.25” sq. stick tools and 2.5” ID tools Turret index time: 0.7 seconds Tail stock taper: #5 MT with Live quill Dimensions: 226” x 90.75” x 103” high x 31,900 lbs. EQUIPPED WITH: OSP-P300LA CONTROLS with AOT (Advanced One Touch) and IGF (Integrated Graphics Function) Conversational programming system with Tool Data and Simulation. SUPER BIG BORE SPINDLE – 60HP, 900RPM, 10.23” THRU HOLE SCHUNK ROTA TB2 600-275 Z450 PNEUMATIC 3-JAW CHUCK (FRONT ONLY) 4-JAW SCROLL CHUCK ON REAR OF SPINDLE STANDARD TOOL PKG ("C") SPINDLE EXTREME LOW SPEED CUTTING FUNCTION SPINDLE ORIENTATION, ELECTRIC TYPE TAILSTOCK, AUTO TOW ALONG CHIP CONVEYOR, SIDE DISCHARGE, HINGE Type PREP FOR AIR CHUCKS, FRONT & REAR PORTABLE PULSE HANDLE THREAD START POINT OFFSET VARIABLE SPINDLE SPEED THREADING RAPID TRAVERSE OVERRIDE SWITCH AOT IGF CONVERSATIONAL PROGRAMMING (ON CONTROL) MP SYSTEMS UL300 MEDIUM PRESSURE COOLANT PUMP (300 PSI) 4) 2.5” ID holders 4) 1.25” OD holders Low hours – Only 254 Cut Hours! Built 9/2014 The above is subject to prior sale and verification by buyer. Specifications and age herein are assumed correct but are not binding in detail. Ask for terms and conditions of sale if not attached. Best regards, Jerry Ditter, Pres. ‘

Okuma LB45-III-1SC-SBB-2000MM

Okuma LB45-III-1SC-SBB-2000MM
CNC Lathes