Overview
Type:
CNC Lathes
Manufacturer:
MORI SEIKI
Model:
SL-150SMC
Condition:
Used - Good
Year:
1996
Stock #:
41742
Status:
For Sale
Serial #:
230
Description

Microcentric collet nose on main spindle, ATS collet nose on sub spindle, 12 station turret, Live milling, 2.2" spindle bore with 1.77" bar capacity, 5,000 rpm on both spindles, also comes with two Kitagawa B205 3-jaw chucks, chip conveyor, parts catcher, tool setter, round, hex, and square collets, 2 Live milling heads, and loaded with standard tooling. Full set of manuals, 15 spindle liners, Fanuc MSC-501 controls. Machine only cut aluminum and brass parts!

Specifications
Swing24.4"
Machining Length13.8"
# Axis4
Chuck Size5"
Bar Capacity1.77"
Power15 hp
Max RPM5,000 RPM
Turning Dia10.2"
TailstockNo (HAS SUB SPINDLE)
Live ToolingYes
Sub SpindleYes
ControlCNC (Fanuc MSC-501)
Dimensions86.6" x 70.3" x 70.3"
Weight10,500 lbs.

One used Mori Seiki SL-150 SMC 3-Axis CNC Lathe Manufacturer: Mori Seiki Model: SL-150 SMC Year: 7/1996 SN: 230 Condition: Excellent Specifications: Swing Over Bed 24.4 Swing Over Cross Slide 17.9 Maximum Turning Diameter: 10.2" Max Turning Length: 13.8" Max Bar Size 1.77" Spindle Speeds: 50-5000 RPM Spindle Motor: 15/10 HP AC Spindle Nose Main A2-5 Spindle Bore: 2.2" Sub Spindle RPM 5,000 RPM Sub-Spindle Bar Capacity 1.2" Sub-Spindle Motor 10/7.5hp Spindle Nose Sub A2-5 Turret Stations: 12/6 For Live Milling Turret Index Time 0.2 Sec Live Tooling RPM 5000 RPM Z- Axis travel 20.5" X- Axis Travel 9.1" Rapid Travels: X and Z 708 / 945 ipm Dimensions: 86.6" " x 70.3" x 70.3" Approximate Weight: 10,500 lbs Wired: 220v/3ph/60, 33 kva Equipped With: Fanuc MSC-501 controls Micro Centric collet nose on main spindle, Md. FB6-ZO ATS collet nose on sub spindle Manual Type Tool Presetter Parts Catcher Milling Operation with C-Axis Control Both Spindle's Sub Spindle 2 live tool holders Collets, including rounds, hex, and square All Available Standard Tooling, most like new Kitamura Md. B205 X 3-jaw chuck Kitamura Md. B205Y 3-jaw chuck 15) Spindle liners All Available Manuals, including: Operator manuals I & II Programing 1 & 2 Maintenance Maintenance Info Maintenance for Safe Operations Electrical Circuit diagram (Red) “ “ (Beige) “ “ (white) Parts Production Dynamics Full Bore Chuck (Microcentric) ATS collet closure Tsubakemoto/Mayfran Chip conveyor This machine ran only brass and aluminum parts. F.O.B. – IL Condition: Excellent Specifications are approximate, intended solely as a guide and are not binding. It is the buyers' responsibility to inspect the goods and ascertain if the specifications, description, and condition of the goods conform to the buyers' requirements. PRICE …………………. $24,500.00 Best regards, Jerry Ditter, Pres.

Mori Seiki Md. SL-150SMC CNC Lathe

$24,500.00 USD
Mori Seiki Md. SL-150SMC CNC Lathe
CNC Lathes
$24,500.00 USD