1997 MORI SEIKI SL-300AMC/700 CNC Lathes | Ditter Industries Inc.
CNC Lathes
Used - Good
Stock #:
For Sale
Serial #:

3.4"" spindle bore, 2.9" bar capacity, 3500 rpm, 28.1" swing, 10.2", Max. turning diameter: 16.5", Std. turning diameter, A2-8 spindle nose, 12 stations, all live mill capable, Fanuc 18T, tool setter, 10) Live tools, 1.5" & 2" ID holders, chip conveyor. Coming out of a lab by June 8th.

Machining Length28.3"
# Axis4
Chuck Size12"
Bar Capacity2.9"
Power20 hp
Max RPM3,500 RPM
Turning Dia16.5"
Live ToolingYes
Sub SpindleNo
ControlCNC (Fanuc 18T)
Dimensions107.6" x 73.4" x 80.5"
Weight15,000 lbs.

One used MORI SEIKI MD. SL-300AMC CNC Lathe with Live Milling Model: SL-300AMC/700 Swing over bed: 28.1” Swing over cross slide: 19.7” Between centers: 29.3” Max. turning dia.: 16.5” Standard turning dia. 10.2” Max. turning length: 28.3” Bar work capacity: 2.9” Travels (X-axis): 9.8” Travels (Z-axis): 31.5” Spindle speed range: 3500 RPM Spindle nose: A2-8 Std. chuck size: 12” Through spindle dia.: 3.4” Tool stations: 12 Tailstock travel: 22.4” Tailstock spindle dia.: 4.3” Taper hole of tailstock spindle MT5 Live center Tailstock spindle travel: 5.9” Rapid traverse X: 590.5 IPM / Z 944.9 IPM Spindle motor: 20 HP Coolant tank capacity: 55 gal Dimensions: 107.6” x 73.4” x 80.5” Weight: 14,740 lbs Wired: 220 volt/3ph/60 cy. EQUIPPED WITH: Fanuc 18T controls Removable tool setter Auto lubrication Built in work light Door interlock system – new in box Absolute Position detectors Synchronized high speed tapping Updated Live milling Tool holders with mounting bolts and shims Chip conveyor 10” 3-jaw hydraulic chuck Manuals include: Parts I & II Installation Maintenance Information Programming I, II, & III Operational I & II Kitagawa Instruction manual Electrical circuit Electrical Ladders Electrical documents with Parameters Fanuc manuals include: Parameters Maintenance Operators SN: 12 Delivered in 1997 Note: Ran mostly aluminum parts F.O.B. - Elk Grove Village, Illinois Purchase option 1: Brand new “Updated Type” live milling installed which includes updated drive shaft, housing, bearings, timing belt, etc. Installed by Mori serviceman. 4) Radial Live holders for X, accepts ER32 collets 6) Axial Live holders for Z, accepts ER32 collets 6) 1.5” capacity ID holders 2) 2” ID holders 8) Stick holders Purchase option 2: Purchase as a 2-axis lathe with all the listed tooling still included 6) 1.5” capacity ID holders 2) 2” ID holders 8) Stick holders Purchase option 3: Add a NIB 12” Kitagawa 3-jaw hydraulic chuck with A2-8 spindle adapter while available $2,950.00 Best regards, Jerry Ditter, Pres. Office: 847-265-1075 Cell: 847-977-4377

Equipped With

Machine may be purchased with an all new Live Milling drive installed or as a 2-axis lathe. Your choice!

Mori Seiki Md. SL-300AMC/700

Mori Seiki Md. SL-300AMC/700
CNC Lathes