Makino Md. V33i Graphite 5 axis Vertical Machining Center - PRICE REDUCED!

ONE USED MAKINO PRECISION DIE MOLD 3+2 5-AXIS VMC
Model: V33i Graphite
Table: 29.5” x 17.7”
Travels: 25.6” x 17.7” x 13.7”
Max.-Min. spindle nose to table: 16.9” – 5.9”
Max. Rapids: 787 ipm
Max. Feed speeds: 787 ipm
Spindle RPM: 30,000
Spindle HP: 22.8/17.4
Spindle taper: HSK-F63
ATC capacity: 25
Max. tool length: 9.8”
Max. tool diameter:3.150”
Max. tool weight: 15.40 lbs.
Dimensions: 91.7" x 81.49" x 94.4" high x 16,971 lbs.
Wired: 460v/3ph/60cy

EQUIPPED WITH:
Scale feed back: 0.05 microns
Automatic air blow nozzle for chips
Automatic air blow thru spindle
Coolant
Air dryer
Auto grease lube
Thermal guard
Spindle chiller, Machine & ballscrew chiller, and Way chiller
Door interlock
Transformer
45 mm ballscrews
Fanuc series 30i: Pro 5, an enhanced version of the Fanuc 18i with Inch/Metric selection, with remote, USB port, and Flash drive
Helical interpolation
Rigid tap
Programmable data input

OPTIONS INCLUDED:
30,000 rpm spindle
HSK-F63 taper with full face contact
Super GI.4 control: Includes 400 Block Look Ahead
Enhanced SGI.4 capability
Graphite Package
Tsudakoma RTT-111 5-axis Rotary table with 3R pallet chuck

Specifications are approximate, intended solely as a guide and are not binding. It is the buyers’ responsibility to inspect the goods and ascertain if the specifications, description, and condition of the goods conform to the buyers’ requirements.

Note: Machine has always been under contract with Makino to do “Preventative Maintenance” and has always been Makino “Only” maintained.
Every 2,000 hours, all covers are removed and the machine is cleaned. All filters are replaced, all oil & fluids drained and replaced with new.
Machine is then then checked for alignment, back lash, ball screws, thrust bearings, and spindle bearings and Run out.
New 2008

Video link: https://youtu.be/EeujWE0Mjac